How to Reset Wyze Cam V3: Step-by-Step Guide

how to reset wyze cam v3

How to Reset Wyze Cam V3, Resetting your Wyze Cam v3 can often be the quickest fix to various issues related to connectivity, firmware updates, or just general troubleshooting.

This comprehensive guide will provide you with all the necessary steps to effectively reset your Wyze Cam v3 and get it back to optimal working conditions.

how to reset wyze cam v3


Before beginning the reset process, make sure you have a paperclip or a similar pointed object handy. Ensure that your Wyze Cam v3 is plugged in and powered on throughout the entire process to facilitate a successful reset.

Locate the Reset Button

The tiny reset button is usually located at the back or the bottom of the Wyze Cam v3. It may be hidden, but it is accessible enough when using a paperclip or similarly pointed object.

Reset Process

  1. Take your paperclip or pointed object and press it firmly into the reset button.
  2. Hold the reset button down for about 10-15 seconds.
  3. Notice the camera’s status light; it should start blinking yellow, signifying that the reset is underway.


After the reset, your camera will go through a reboot cycle returning to the factory default settings. At this point, use the Wyze app to set up your camera as if it was brand new.

Reconnect the camera to your Wi-Fi network and re-associate it with your Wyze account following the in-app instructions.


Once you’ve reset and reconfigured your camera, it’s important to perform a quick test to ensure everything is operating correctly.

Check the camera’s functionality and its connection to your Wyze app.


If the status light doesn’t blink yellow, or the camera fails to reset properly, here are a few tips:

  • Confirm the reset button was pressed firmly and held for the full 10-15 seconds.
  • Verify that the camera was powered on for the entire duration of the reset process.
  • Reattempt the reset process if the camera does not enter setup mode afterward.
  • Contact Wyze Support if issues persist after following these troubleshooting steps.

Real-life Examples

Resetting the Wyze Cam v3 has proven useful for various users, such as:

  • Regaining access to a camera after network disruptions.
  • Recouping functionality after a failed firmware update.
  • Alleviating continued connectivity problems by reverting to default settings.


Wyze Cam V3 Check Latest Price on amazon

Frequently Asked Questions On How to Reset Wyze Cam V3

Does resetting the Wyze Cam v3 delete video recordings?

No, resetting the camera affects the settings and configuration but not the content stored on the cloud or inserted microSD card.

How often should I reset my Wyze Cam v3 for maintenance?

Resets should be reserved for troubleshooting issues rather than regular maintenance. Only reset if necessary and after exhausting other troubleshooting measures.

How do I fix my unresponsive WYZE camera?

To fix an unresponsive WYZE camera, first ensure that your camera is properly plugged in and receiving power. You can then try to force restart the camera by unplugging it, waiting 10 seconds, and plugging it back in. If the problem persists, verify that the camera’s firmware is up to date through the WYZE app.

How do I get my WYZE camera back online?

To get your WYZE camera back online, check your internet connection and make sure your Wi-Fi network is operational. Restart your camera and your router.

If your camera still doesn’t come back online, attempt to reconnect it to Wi-Fi through the WYZE app settings.

How do I reset my WYZE Cam for a new owner?

To reset your WYZE Cam for a new owner, press and hold the reset button on the bottom of the camera until the light turns solid red. Release the button and wait for the camera to reset, which will remove all previous settings and allow a new owner to set it up from scratch.

Why is my WYZE Cam v3 not starting?

If your WYZE Cam v3 is not starting, ensure that it is properly connected to a power source. Check the power cable and the adapter for any signs of damage. If everything seems fine, try using a different power source or cable to rule out power issues.

Does the WYZE Cam v3 have a reset button?

Yes, the WYZE Cam v3 has a reset button located on the bottom of the camera. This button can be used to reset the camera to factory settings, which is especially useful when troubleshooting or preparing the device for a new user.

How do you force cycle a Wyze camera?

To force cycle a Wyze camera, simply unplug the camera from its power source, wait approximately 10 seconds, and then plug it back in. This will force the camera to restart, which can resolve many minor operating issues.

How to do a hard reset on Wyze camera?

To perform a hard reset on a Wyze camera, locate the reset button on the camera and press and hold it until the status light turns red. This usually takes about 5 seconds. Release the button, and the camera will reset to its factory settings.

How do I reconnect my Wyze camera to Wi-Fi?

To reconnect your Wyze camera to Wi-Fi, open the Wyze app and go to the camera settings. Select the option to change or reconnect to a Wi-Fi network and follow the on-screen instructions to select your network and enter the password.

How do I reset my Wyze after a power outage?

After a power outage, your Wyze camera should automatically reconnect to the Wi-Fi once power is restored. If it does not, restart the camera by unplugging it and plugging it back in.

If this doesn’t work, you may need to reconnect it to your Wi-Fi network through the app.

What happens if I unplug my Wyze camera?

If you unplug your Wyze camera, it will shut down and disconnect from the Wi-Fi network. Once you plug the camera back in, it should automatically reboot and reconnect to the network. If it doesn’t, you may need to manually reconnect it through the Wyze app.

How do I reconnect my Wyze camera after a power outage?

To reconnect your Wyze camera after a power outage, wait for the camera to automatically reconnect once power is restored. If it does not reconnect, unplug the camera, wait a few seconds, and plug it back in. If necessary, manually reconnect it to Wi-Fi through the Wyze app.

Why is my Wyze camera offline but plugged in?

If your Wyze camera is offline but plugged in, it may be experiencing connectivity issues. Check to ensure your Wi-Fi network is working correctly.

Restart both your camera and your router, and if the issue persists, try reconnecting the camera to your Wi-Fi network through the Wyze app.

Why is my Wyze V3 camera offline?

Your Wyze V3 camera may be offline due to Wi-Fi connectivity issues, power supply problems, or a need for a device reset.

Start by checking the power and internet connections, then try restarting the camera and your router. If these steps don’t solve the issue, consider resetting the camera.

Why is my wyze cam offline flashing blue?

A flashing blue light on your Wyze cam indicates that it is trying to connect to a Wi-Fi network but hasn’t succeeded. Ensure your router is working and close enough to the camera.

If problems persist, reset your camera and attempt to reconnect to Wi-Fi through the app again.

Does WYZE Cam 3 work without Wi-Fi?

The WYZE Cam 3 requires a Wi-Fi connection for full functionality, including live streaming and notifications. Without Wi-Fi, it is not able to communicate with the WYZE app or store footage to the cloud, significantly limiting its features and capabilities.


Knowing how to reset your Wyze Cam v3 is essential for resolving occasional technical issues and ensuring your security device remains functional and efficient.

With this guide, you are now equipped to handle the reset process and are one step closer to mastering the troubleshooting of your smart home device.

Wyze Cam V3 Check Latest Price on amazon